Classic Accessories Colorado XT Specifications download pdf (Page 11)

COLORADO XT PONTOON BOAT OWNER’S MANUAL

ASSEMBLY AND USE

Right hand

pontoon and

frame

Press and

turn on

center

button

Inflation Valve

Inflation

adapter

Insert

into

valve

and

twist to

inflate

It is important to follow these instructions to successfully and safely assemble

your Classic Accessories Pontoon Boat.

Please pay particular attention to the bold faced instructions and any

information which has this symbol next to it.

FRONT

B C

1. Confirm that all the parts are present.

(See the parts list on page 10).

2. Identify the right and left pontoons.

Youcanidentifytherightandleftpontoonsbythe“R”(right)and“L”(left)labelssewnontheinside

of the rear pocket on top of each.

3. Partially inflate the air bladders.

The valve is located on the top of the pontoons in front

of the main pocket.

The valve has a center button that opens and closes

the valve by simply pushing down, and turning a

quarter turn. The valve is open when the center button

is down, and closed when it is up. BEFORE INFLATING,

MAKE SURE THE VALVE IS IN THE CLOSED POSITION.

Unscrew the valve cap, make sure the valve is closed

and insert the inflation adapter into the valve and

twist to secure. Inflate using a foot pump or air

compressor with a cone-type nozzle fitting.

Inflate the pontoon to about 3/4 full. Do not inflate

beyond 3/4 full because it will make the next step

very difficult—attaching the pontoons to the frame.

Repeatthisstepwiththeotherpontoon.Youwillfully

inflate the pontoons in step 5.

4. Attach the pontoons to the frames.

Each pontoon attaches to a metal pontoon frame with

four webbing attachment straps.

Locate the left and right pontoon frames.

On the front of each pontoon frame (where the front of the

boat will be) there is a “L" (left) or “R” (right) label indicating

left or right.

Place a right pontoon frame on top of the right pontoon as

shown. There is a “L” (left) or “R” (right) label inside the

pocket of each pontoon. The longest straight tube of each

frame should be on the same side of the pontoon as the

pontoon zipper.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 41 42

Comments to this Manuals

No comments

Classic Accessories Colorado XT Specifications Page 11

Comments to this Manuals