Classic Accessories Cimarron Specifications download pdf (Page 13)

1

closest to the oar lock). Insert the foot pegs into

the pontoon frame and attach with short clevis

pins. Choose a position in the middle of the

adjustment range.

8. Attach the cargo deck.

The cargo deck comes partially assembled to

the rear of the deck frame. Start by inserting

the front of the cargo deck frame into pontoon

frames. Insert a short clevis frame pin on either

side of the frame from the top down into the

holes where the cargo deck frame slides into the

pontoon frames.

Now attach webbing straps over the frame,

through the square ring and secure with the

hook and loop straps. Some adjustment may be

necessary to center the fabric deck on the frame.

9. Secure the seat back into place.

Slide the seat stubs onto each end of the

seat back frame. Next, slide the seat back

panel onto the seat back frame. Then place

the assembled seat back into position on the

outsides of the seat frame and secure to the seat

base with the two long clevis frame pins.

10. Attach the stripping apron.

Orient the stripping apron in front of and under

the seat as shown. Attach the straps on the front

corners of the apron, around the frame, through

the square ring and over the

hook and loop straps.

11. Do the first fitting.

Sit in the boat and adjust the

length of the foot pegs. (Many

people find the most comfortable position is to

have their knees slightly bent.)

You can also move the platform forward or back

slightly on the pontoons by loosening

Rear view of

seat back assembly

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments